Muskogee Road Models

Hal Miller Photo
Hal Miller O-gauge model. KO&G coal hopper 700 is an Intermountain model.

Hal Miller Photo
Number 750 is an Atlas model based on the same tooling as the Intermountain model.

Hal Miller Photo
Both models are lettered with Oddball decals.

Model and Photos by Bob Shick
The locomotive is 7 1/2 inch gauge, i.e., 7 1/2 inches nominal between the rails, and is slightly over 6 feet long. The real scale is 1.6 inches to the foot and should have been 1.5 inches to the foot (1/8 scale) except the Briggs & Stratton engine wouldn't fit in a 1.5 inches to the foot loco cab. The locomotive weighs about 475 pounds.

A couple of HO scale Branchline models

Midland Valley Model Railroad
http://www.corbu.us/Brittian-Layout/Brittian%20layout%20web.html

This page was designed and is maintained by Mike Condren. If you have materials
that you would like to contribute, contact me at mcondren@cbu.edu